Description
Ultra Grey Rigid High Torque RTV Silicone – 13oz
OEM specified. Permatex and reg Ultra silicones were developed to meet technology changes. Sensor-safe, low odor, noncorrosive. Outstanding oil resistance and joint movement tolerance. Eight times more flexible than cork/composite gaskets three times more oil resistant than conventional silicones. Temperature range -65 and ordmF to 500 and ordmF (-54 and degC to 260 and degC) intermittent resists auto and shop fluids and vibration. and nbsp
Applications:
- Automobile – Suggested Applications: Valve covers, oil pans, automatic transmission pans, intake manifold end seals, timing covers, water pumps, thermostat housings
- Heavy Duty – Suggested Applications: Cover housing gasket, differential, assembly to rear axle housing, power dividers, axle shaft flanges
Directions:
- For best results, clean and dry all surfaces with a residue-free solvent such as Permatex and reg Brake and amp Parts Cleaner.
- Cut nozzle to desired bead size. Gaskets are best formed using a 1/16 and Prime to 1/4 and Prime (1.6 mm to 6.4 mm) bead.
- Apply a continuous, even bead of silicone to one surface, surrounding all bolt holes. Assemble parts immediately while silicone is still wet. Finger tighten until material begins to squeeze out around flange. Allow to dry for one hour, then retighten 1/4 to 1/2 turn.
- Silicone will skin over in one hour and fully cure in 24 hours, under normal conditions. Allow more time for cold or very dry conditions.
- Clean uncured silicone from hands, tools and clothing with Permatex and reg and nbspFast Orange and reg and nbspHand Cleaner.
NOTE: Not recommended for use on head gaskets or on parts in contact with gasoline.
